DJI O4 Conversion Kit - Cinehawk Mini

Product Code: 0110003198

Availability:Out of stock

Production notesThis kit fits the EMAX Cinehawk Mini 2.5" and the DJI O4 Air Unit Pro (both sold separately).

DJI O4 Conversion Kit for the EMAX Cinehawk Mini 2.5 inch cinewhoop

REEL 2AccessoryDJI O4 ProREC 00:00:00:01

EMAX presents

O4 Conversion Kit

The next reel for your Cinehawk Mini: mount the DJI O4 Air Unit Pro.

Render of the Cinehawk Mini with the O4 conversion kit parts highlighted in red
Kit parts shown in redEMAX render

Move your Cinehawk Mini to DJI O4. This EMAX kit adds 3D-printed camera and antenna mounting parts sized for the DJI O4 Air Unit Pro, so you can fly O4 Pro in the same 2.5-inch ducted frame. The standard DJI O4 Air Unit is rated for only 3.7–13.2V, below a fully charged 4S pack, so this kit is for the Pro.

Fits Cinehawk Mini 2.5"For DJI O4 Air Unit Pro3D-printed partsSKU 0110003198

SC. 01In the bagTK 100:01:00:00

Four parts. One upgrade.

  • 1×Camera cover: printed top cover that fits over the O4 Air Unit Pro camera in the front camera pod
  • 2×Camera side mounts: small printed brackets that hold the O4 Air Unit Pro camera in the camera pod
  • 1×Antenna mount: holds the O4 Air Unit Pro antennas at the rear of the frame

Not included: DJI O4 Air Unit Pro, Cinehawk Mini, goggles, radio, battery, screws.

Cinehawk Mini O4 conversion kit: all four 3D-printed parts
All partsSKU 0110003198
Printed camera cover from the Cinehawk Mini O4 conversion kit
Camera coverPrinted
Antenna mount from the Cinehawk Mini O4 conversion kit
Antenna mountPrinted

SC. 02BlockingTK 100:02:00:00

Where the parts go.

The red parts in the render at the top of this page show where the kit sits on the Cinehawk Mini: the printed cover and side mounts hold the DJI O4 Air Unit Pro camera at the front of the frame, and the antenna mount holds its antennas at the rear.

FitsEMAX Cinehawk Mini 2.5"
UnitDJI O4 Air Unit Pro, sold separately
Parts3D-printed mounting parts

Remove any installed video system (on the BNF, the O3 Air Unit, camera and antenna) before installing. Use the DJI O4 Air Unit Pro (rated 7.4–26.4V). Check that the camera and antennas clear the props before your first flight.

Camera cover and camera side mounts from the Cinehawk Mini O4 conversion kit
Cover and side mountsPrinted

SC. 03End creditsTK 100:03:00:00

The specifications.

Product
DJI O4 Conversion Kit - Cinehawk Mini
SKU
0110003198
UPC
769283959930
Fits
EMAX Cinehawk Mini 2.5"
For
DJI O4 Air Unit ProSold separately
Contents
Four 3D-printed parts1 camera cover, 2 camera side mounts, 1 antenna mount
Brand
EMAX

A film by EMAX

SC. 04Q&ATK 100:04:00:00

Questions from the crew.

Does the kit include the DJI O4 Air Unit Pro?+

No. The kit contains the printed mounting parts only. The DJI O4 Air Unit Pro is sold separately by DJI and its retailers.

Which drone does it fit?+

The EMAX Cinehawk Mini 2.5". Remove any installed video system first (on the BNF with O3, the O3 Air Unit, camera and antenna).

Why the O4 Air Unit Pro and not the standard O4?+

The Cinehawk Mini is rated for 2S to 4S, and EMAX quotes its flight times on 4S. The standard DJI O4 Air Unit is rated for 3.7–13.2V, below a fully charged 4S pack (16.8V), while the O4 Air Unit Pro is rated for 7.4–26.4V.

Which goggles do I need?+

DJI Goggles 3, Goggles N3, Goggles 2 or Goggles Integra. DJI FPV Goggles V2 do not support O4. Update the goggles and air unit firmware before your first flight.

Need the drone?This kit fits the EMAX Cinehawk Mini 2.5" and the DJI O4 Air Unit Pro (both sold separately).