{"title":"5.X\"","description":"","products":[{"product_id":"emax-avan-s-propeller-5-set-bulk-10-cw-10-ccw","title":"AVAN-S Propeller 10CW 10CCW - CHOOSE COLOR","description":"\u003ch1\u003e \u003c\/h1\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0371\/2814\/2907\/files\/1_01.gif\" alt=\"\" width=\"850\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0371\/2814\/2907\/files\/1_02.gif\" alt=\"\" width=\"850\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0371\/2814\/2907\/files\/1_03.jpg\" alt=\"\" width=\"850\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0371\/2814\/2907\/files\/1_04.gif\" alt=\"\" width=\"850\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBlades profiles are optimized at key point along the length of the blade maximize lift coefficients.\u003c\/li\u003e\n\u003cli\u003e \u003c\/li\u003e\n\u003cli\u003eLinear throttle response - predictable response of propeller action throughout the entire throttle band.\u003c\/li\u003e\n\u003cli\u003e \u003c\/li\u003e\n\u003cli\u003eHigh grade poly carbonate for propeller and stiffness.\u003c\/li\u003e\n\u003cli\u003e \u003c\/li\u003e\n\u003cli\u003eOptimized design to match motor performance curves of the RS2306 series of brushless motors and similar performing motors in its class.\u003c\/li\u003e\n\u003cli\u003e \u003c\/li\u003e\n\u003cli\u003eAdvance Ratio is used instead of conventional pitch theory to make the most efficient propeller in both speed and handling.\u003c\/li\u003e\n\u003cli\u003e \u003c\/li\u003e\n\u003cli\u003eExclusive locking design in propeller hub to match with RS2306 and RS2205 motors to lessen prop loosening during flight.\u003c\/li\u003e\n\u003cli\u003e \u003c\/li\u003e\n\u003cli\u003eCountless hours of R\u0026amp;D were implemented on genuine AVAN propellers to take advantage of the RS2306 (and most modern 22xx and 23xx motors) full potential.\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003cli\u003eUse of non-genuine (copied or cloned) propeller is NOT RECOMMENDED and will yield poor performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eAVAN Prop Background for detailed explanation\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eThe Avan propellers are designed from the ground up to match your equipment. Each propeller is designed to match the power curve of current motors on the market. This gives the propellers a linear throttle response, great low end control, and incredible top speed. The matched power curve allows efficient transfer of power across the throttle band.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eEach propeller was designed using custom Computational Fluid Dynamics (CFD) software. This CFD builds up the aerodynamics around a propeller using a Vortex Lattice Method including viscous and compressibility effects. This allows for an accurate performance measure in the design phase. Optimum design is chosen based off the Betz condition for a set design point. The design point is described as diameter, number of blades, speed, rpm, flight angle, and design thrust. The CFD then draws the optimum chord and blade angle distribution (Beta) along the radius to be the most efficient at that design point. This is done by modeling the shedding vortex filaments off each radial section along the blade and making them all shed off in a perfect rectangular screw (Betz Condition). Once the optimum design is set, performance is modeled across a range of speed and rpms (Advance ratio). With power and thrust known for all advance ratios, it is checked against the performance curve of the intended motor. Design conditions are then adjusted to utilize the maximum power available at each rpm from the performance curve of the set motor. This is then analyzed at different throttle positions, favoring the mid throttle range the design conditions are set.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eWith the set chord and blade angle distribution, the propeller is modeled in CAD. Finite Element Analysis (FEA) is performed on the blade for different load conditions. Based on the stress distribution thicker or thinner airfoils are chosen along with the blade and hub interaction. If the airfoil is changed, the CFD analysis is redone and a different chord and beta distribution is found and this process is repeated. FEA is also used to analyze the frequency response of the design. A material is chosen that adequately pushes the first vibration mode away from typical motor resonance frequencies.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eThe Avan-R propeller is a triblade designed for the racer. Expect incredible top end speed with great low end control and a locked in grippy feel. The Avan-R has a design advance ratio of .65 with a 5.0 inch pitch at 75% of the radius. The Avan-R has a weight of 5 g and a moment of inertia of 34 g\/cm^2 Specifically designed to match the power curve of the Emax 2306 2400kv motor. The optimum design point for the Avan-R is at 70 mph at 45 degree flight angle, 16000 rpm, with an all up weight expected around 650g. This design target is right around half throttle. The Avan-R uses airfoils that achieve high lift coefficients which expands its stall range and ultimately its efficiency range. This propeller utilizes all the torque available from the Emax 2306 2400kv motor giving extreme responsiveness and efficient transfer of power.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eThe Avan-S propeller is a dual blade designed for top speed with high rpm set ups. This propeller is designed to match the power curve of the Emax 2306 2750kv motor. The Avan-S has a design advance ratio of .75 with a 4.2 inch pitch at 75% of radius. The Avan-S has a weight of 4 g and a moment of inertia of 25 g\/cm^2. The Avan-S uses airfoils capable of achieving higher lift coefficients at lower angles of attack to achieve more speed with less blade angle necessary. The Avan-S has a design point of 110 mph at 30000 rpm at 80 degree flight angle. This is close to a full throttle design with lighter aircraft being able to go faster. Expect to push well past 100 mph just on 4s.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Emax-US","offers":[{"title":"Red","offer_id":33691106181179,"sku":"AVAN-S-Red","price":1.99,"currency_code":"USD","in_stock":false},{"title":"Blue","offer_id":33691106213947,"sku":"AVAN-S-Blue","price":1.99,"currency_code":"USD","in_stock":true},{"title":"Green","offer_id":33691106246715,"sku":"AVAN-S-Green","price":1.99,"currency_code":"USD","in_stock":false},{"title":"Yellow","offer_id":33691106279483,"sku":"AVAN-S-Yellow","price":1.99,"currency_code":"USD","in_stock":true},{"title":"Orange","offer_id":33691106410555,"sku":"AVAN-S-Orange","price":1.99,"currency_code":"USD","in_stock":false},{"title":"Purple","offer_id":33691106443323,"sku":"AVAN-S-Purple","price":1.99,"currency_code":"USD","in_stock":false},{"title":"Clear","offer_id":33691106476091,"sku":"AVAN-S-Clear","price":1.99,"currency_code":"USD","in_stock":true},{"title":"Black Frost","offer_id":33691106508859,"sku":"AVAN-S-Black Frost","price":1.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0371\/2814\/2907\/products\/Screen_Shot_2017-06-19_at_2.00.33_PM__29192.1497906726.1280.1280.pngc-2.png?v=1590534595"},{"product_id":"emax-avan-s-propeller-1-set-2-cw-2-ccw-prop","title":"AVAN-S Propeller 2CW 2CCW - CHOOSE COLOR","description":"\u003ch1\u003e\u003cbr\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0371\/2814\/2907\/files\/1_01.gif\" alt=\"\" width=\"850\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0371\/2814\/2907\/files\/1_02.gif\" alt=\"\" width=\"850\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0371\/2814\/2907\/files\/1_03.jpg\" alt=\"\" width=\"850\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0371\/2814\/2907\/files\/1_04.gif\" alt=\"\" width=\"850\"\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eBlades profiles are optimized at key point along the length of the blade maximize lift coefficients.\u003c\/li\u003e\n\u003cli\u003e \u003c\/li\u003e\n\u003cli\u003eLinear throttle response - predictable response of propeller action throughout the entire throttle band.\u003c\/li\u003e\n\u003cli\u003e \u003c\/li\u003e\n\u003cli\u003eHigh grade poly carbonate for propeller and stiffness.\u003c\/li\u003e\n\u003cli\u003e \u003c\/li\u003e\n\u003cli\u003eOptimized design to match motor performance curves of the RS2306 series of brushless motors and similar performing motors in its class.\u003c\/li\u003e\n\u003cli\u003e \u003c\/li\u003e\n\u003cli\u003eAdvance Ratio is used instead of conventional pitch theory to make the most efficient propeller in both speed and handling.\u003c\/li\u003e\n\u003cli\u003e \u003c\/li\u003e\n\u003cli\u003eExclusive locking design in propeller hub to match with RS2306 and RS2205 motors to lessen prop loosening during flight.\u003c\/li\u003e\n\u003cli\u003e \u003c\/li\u003e\n\u003cli\u003eCountless hours of R\u0026amp;D were implemented on genuine AVAN propellers to take advantage of the RS2306 (and most modern 22xx and 23xx motors) full potential.\u003c\/li\u003e\n\u003cli\u003e \u003c\/li\u003e\n\u003cli\u003eUse of non-genuine (copied or cloned) propeller is NOT RECOMMENDED and will yield poor performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cstrong\u003eAVAN Prop Background for detailed explanation\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThe Avan propellers are designed from the ground up to match your equipment. Each propeller is designed to match the power curve of current motors on the market. This gives the propellers a linear throttle response, great low end control, and incredible top speed. The matched power curve allows efficient transfer of power across the throttle band.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eEach propeller was designed using custom Computational Fluid Dynamics (CFD) software. This CFD builds up the aerodynamics around a propeller using a Vortex Lattice Method including viscous and compressibility effects. This allows for an accurate performance measure in the design phase. Optimum design is chosen based off the Betz condition for a set design point. The design point is described as diameter, number of blades, speed, rpm, flight angle, and design thrust. The CFD then draws the optimum chord and blade angle distribution (Beta) along the radius to be the most efficient at that design point. This is done by modeling the shedding vortex filaments off each radial section along the blade and making them all shed off in a perfect rectangular screw (Betz Condition). Once the optimum design is set, performance is modeled across a range of speed and rpms (Advance ratio). With power and thrust known for all advance ratios, it is checked against the performance curve of the intended motor. Design conditions are then adjusted to utilize the maximum power available at each rpm from the performance curve of the set motor. This is then analyzed at different throttle positions, favoring the mid throttle range the design conditions are set.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eWith the set chord and blade angle distribution, the propeller is modeled in CAD. Finite Element Analysis (FEA) is performed on the blade for different load conditions. Based on the stress distribution thicker or thinner airfoils are chosen along with the blade and hub interaction. If the airfoil is changed, the CFD analysis is redone and a different chord and beta distribution is found and this process is repeated. FEA is also used to analyze the frequency response of the design. A material is chosen that adequately pushes the first vibration mode away from typical motor resonance frequencies.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe Avan-R propeller is a triblade designed for the racer. Expect incredible top end speed with great low end control and a locked in grippy feel. The Avan-R has a design advance ratio of .65 with a 5.0 inch pitch at 75% of the radius. The Avan-R has a weight of 5 g and a moment of inertia of 34 g\/cm^2 Specifically designed to match the power curve of the Emax 2306 2400kv motor. The optimum design point for the Avan-R is at 70 mph at 45 degree flight angle, 16000 rpm, with an all up weight expected around 650g. This design target is right around half throttle. The Avan-R uses airfoils that achieve high lift coefficients which expands its stall range and ultimately its efficiency range. This propeller utilizes all the torque available from the Emax 2306 2400kv motor giving extreme responsiveness and efficient transfer of power.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe Avan-S propeller is a dual blade designed for top speed with high rpm set ups. This propeller is designed to match the power curve of the Emax 2306 2750kv motor. The Avan-S has a design advance ratio of .75 with a 4.2 inch pitch at 75% of radius. The Avan-S has a weight of 4 g and a moment of inertia of 25 g\/cm^2. The Avan-S uses airfoils capable of achieving higher lift coefficients at lower angles of attack to achieve more speed with less blade angle necessary. The Avan-S has a design point of 110 mph at 30000 rpm at 80 degree flight angle. This is close to a full throttle design with lighter aircraft being able to go faster. Expect to push well past 100 mph just on 4s.\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Emax-US","offers":[{"title":"Red","offer_id":33691107131451,"sku":"EMX-MP-1997-Red","price":0.49,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":33691107164219,"sku":"EMX-MP-1997-Blue","price":0.49,"currency_code":"USD","in_stock":true},{"title":"Green","offer_id":33691107196987,"sku":"EMX-MP-1997-Green","price":0.49,"currency_code":"USD","in_stock":true},{"title":"Yellow","offer_id":33691107229755,"sku":"EMX-MP-1997-Yellow","price":0.49,"currency_code":"USD","in_stock":true},{"title":"Orange","offer_id":33691107262523,"sku":"EMX-MP-1997-Orange","price":0.49,"currency_code":"USD","in_stock":false},{"title":"Purple","offer_id":33691107295291,"sku":"EMX-MP-1997-Purple","price":0.49,"currency_code":"USD","in_stock":false},{"title":"Clear","offer_id":33691107328059,"sku":"EMX-MP-1997-Clear","price":0.49,"currency_code":"USD","in_stock":true},{"title":"Black Frost","offer_id":33691107360827,"sku":"EMX-MP-1997-Black Frost","price":0.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0371\/2814\/2907\/products\/img_6747_1.jpg?v=1590534609"},{"product_id":"avan-flow-propeller-5x4-3x3-fpv-racing-propeller-1-set","title":"AVAN Flow Propeller 5x4.3x3 - CHOOSE COLOR","description":"\u003cp\u003e\u003cstrong\u003eTech Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eGeometry:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e5 inch diameter\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e4.3 inch pitch\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e3 blades\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003e\u003cspan\u003eInertial Properties:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eweight: 4.3 grams\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMoment of Inertia: 13.4 g*cm^2\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eProduct Description:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Emax Avan Flow propeller 5x4.3x3 was designed to maximize control while remaining efficient. A true constant 4.3\" pitch throughout the blade gives a linear control feeling across the throttle band while still achieving high speeds. With a special PC blend the Avan Flow weighs 4.3 grams. Most of the weight is centralized near the hub creating a low moment of inertia of 13.4 grams*square centimeter which in turn makes a very responsive prop.  Best match for 2206-2207-2306 motors around 2400kv. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003eThe Avan Flow was designed from the ground up starting from design constraints such as RPM, air speed, and required thrust. From these constraints aerodynamic models were built to predict performance and to design the blade shape. Highly cambered airfoils were used to achieve high lift coefficients at high angles of attack prolonging stall. This allows for a higher blade angle while still remaining efficient. The cambered airfoils also allow a greater flight envelope making for great low end responsiveness while still being able to achieve high speeds. \u003cbr\u003e\u003cbr\u003eA special Polycarbonate blend is used to achieve high durability. This material is incredibly tough and ductile to resist fracture in high impact crashes. A thick blade root was designed to further increase this durability. Our injection mold process is optimized to reduce bubbles in the plastic to increase the strength of the propeller.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Emax-US","offers":[{"title":"Clear","offer_id":33691110670395,"sku":"EMX-MP-2110-Clear","price":3.49,"currency_code":"USD","in_stock":true},{"title":"Clear Black","offer_id":33691110703163,"sku":"EMX-MP-2110-Clear Black","price":3.49,"currency_code":"USD","in_stock":true},{"title":"Clear Red","offer_id":33691110735931,"sku":"EMX-MP-2110-Clear Red","price":3.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0371\/2814\/2907\/products\/569A0321.jpg?v=1596666952"},{"product_id":"avan-scimitar-5x2-6x3-2cw-2ccw-5026-3-red","title":"Avan Scimitar 5x2.6x3 (2CW+2CCW) 5026-3 Red","description":"\u003cdiv\u003e\u003cb\u003eTech Specs:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eGeometry:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e5 inch diameter\u003c\/div\u003e\n\u003cdiv\u003e2.6 inch pitch\u003c\/div\u003e\n\u003cdiv\u003e3 blades\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eInertial Properties:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003eweight: 4.16 grams\u003c\/div\u003e\n\u003cdiv\u003eMoment of Inertia: 26.4 g*cm^2\u003c\/div\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003eAvan Scimitar 5x2.6x3 (2CW+2CCW) 5026-3 Red This is also used in the EMAX Buzz BNF as a light weight easy to fly propeller. Giving power and efficiency in flight.\u003c\/p\u003e","brand":"Emax-US","offers":[{"title":"Default Title","offer_id":33691188494395,"sku":"Avan Scimitar 5x2.6x3 (2CW+2CCW) 5026-3 Red","price":3.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0371\/2814\/2907\/products\/photo-8723.jpg?v=1590535016"},{"product_id":"avan-scimitar-5x2-8x3-5028-3-propeller-2cw-2ccw-red","title":"Avan Scimitar 5x2.8x3 5028-3 Propeller 2CW+2CCW Red","description":"\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0371\/2814\/2907\/files\/Infographic-Scimitar_01.jpg\" alt=\"\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0371\/2814\/2907\/files\/Infographic-Scimitar_02.jpg\" alt=\"\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0371\/2814\/2907\/files\/Infographic-Scimitar_03.jpg\" alt=\"\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0371\/2814\/2907\/files\/Infographic-Scimitar_04.jpg\" alt=\"\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0371\/2814\/2907\/files\/Infographic-Scimitar_05.jpg\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: large;\"\u003eTech Specs: \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003eGeometry: 5 inch diameter 2.8 inch pitch 3 blades \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: large;\"\u003eInertial Properties: \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003eWeight: 3.90 grams \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003eMoment of Inertia: 24.1 g*cm^2\u003c\/span\u003e\u003c\/p\u003e","brand":"Emax-US","offers":[{"title":"Default Title","offer_id":33691189379131,"sku":"1143","price":3.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0371\/2814\/2907\/products\/photo-8871.jpg?v=1590535026"},{"product_id":"avan-scimitar-5x2-8x4-5028-4-propeller-2cw-2ccw-red","title":"Avan Scimitar 5x2.8x4 5028-4 Propeller 2CW+2CCW Red","description":"\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0371\/2814\/2907\/files\/Infographic-Scimitar_01.jpg\" alt=\"\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0371\/2814\/2907\/files\/Infographic-Scimitar_02.jpg\" alt=\"\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0371\/2814\/2907\/files\/Infographic-Scimitar_03.jpg\" alt=\"\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0371\/2814\/2907\/files\/Infographic-Scimitar_04.jpg\" alt=\"\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0371\/2814\/2907\/files\/Infographic-Scimitar_05.jpg\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cb\u003eTech Specs:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eGeometry:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e5 inch diameter\u003c\/div\u003e\n\u003cdiv\u003e2.8 inch pitch\u003c\/div\u003e\n\u003cdiv\u003e4 blades\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eInertial Properties:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003eweight: 6.2 grams\u003c\/div\u003e","brand":"Emax-US","offers":[{"title":"Default Title","offer_id":33691189968955,"sku":"1144","price":3.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0371\/2814\/2907\/products\/photo-8908.jpg?v=1590535028"},{"product_id":"avan-scimitar-5x3-0x3-5030-3-propeller-2cw-2ccw-red","title":"Avan Scimitar 5x3.0x3 5030-3 Propeller 2CW+2CCW Red","description":"\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0371\/2814\/2907\/files\/Infographic-Scimitar_01.jpg\" alt=\"\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0371\/2814\/2907\/files\/Infographic-Scimitar_02.jpg\" alt=\"\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0371\/2814\/2907\/files\/Infographic-Scimitar_03.jpg\" alt=\"\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0371\/2814\/2907\/files\/Infographic-Scimitar_04.jpg\" alt=\"\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0371\/2814\/2907\/files\/Infographic-Scimitar_05.jpg\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cb\u003eTech Specs:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eGeometry:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e5 inch diameter\u003c\/div\u003e\n\u003cdiv\u003e3.0 inch pitch\u003c\/div\u003e\n\u003cdiv\u003e3 blades\u003c\/div\u003e\n\u003cdiv\u003eweight:  5.4 grams\u003c\/div\u003e","brand":"Emax-US","offers":[{"title":"Default Title","offer_id":33691190001723,"sku":"1145","price":3.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0371\/2814\/2907\/products\/photo-8889.jpg?v=1590535029"},{"product_id":"emax-avia-5030-ultralight-5-3-blade-propeller-set-red","title":"EMAX Avia 5030 - Ultralight 5\" 3 Blade Propeller Set - Red","description":"\u003cp\u003eSpare propellers for EMAX Hawk Apex 5\" variant or can be used on any craft that will fit T-mount 5\" propellers!\u003c\/p\u003e\n\u003cp\u003eModerate profile for a ultralight 5\" craft, lightweight for long range cruising or racing efficiency.\u003c\/p\u003e","brand":"Emax USA","offers":[{"title":"Default Title","offer_id":43436062671084,"sku":"AVIA5030","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0371\/2814\/2907\/products\/5.png?v=1667422074"}],"url":"https:\/\/shop.emax-usa.com\/collections\/5-x.oembed","provider":"Emax USA","version":"1.0","type":"link"}